You are here Home. Cap embroidery presents unique challenges to many embroiderers. One last thought when embroidering caps; do both the front and side panels on the same run. Embroidery backing suppliers carry a special backing for caps. If the design has a lot of fill stitching, the cap backing mentioned above, may be necessary. Insert the cap visor into the slot in the cap frame strap as you swing the strap over the front of the cap. Even though cap frames were designed to run embroidery on a horizontal plane that theoretically spans degrees of cap frame rotation, the actual sewing field may be limited.

Uploader: Shaktik
Date Added: 22 October 2007
File Size: 14.41 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15161
Price: Free* [*Free Regsitration Required]

His ambition and hard work moved him up quickly, and he eventually started his own multi-head embroidery company by the name of Emblematix, Inc. Read more about Nathaniel Moore. fap

Cap Embroidery with Melco Embroidery Machines

Use the following step-by-step process for proper hooping with the CCF cap frame to achieve the best quality embroidery. Remove the cap frame with hooped cap from the cap gauge and move to the already installed Wide Angle Cap driver.

For example, if the design consisted of the numerals from 1 to 5, start by digitizing the numeral 3 first, then do the 4, then do the 2, then 5 and finally the numeral 1. For this challenge, we need to expand two skill sets, a digitizing and b machine operation. If the cap is structured usually a fused Buchram or heavy Pelon backingthese clips may be omitted to speed up production. One simple way to minimize this pull is to choose a melxo direction that runs parallel to the narrowest dimension of the fill.

If the embroidery design and the cap design permit you to do so, by all means cp so.

  MICROSOFT INTELLIMOUSE OPTICAL USB AND PS2 COMPATIBLE DRIVER DOWNLOAD

Remember to compensate for more layers of material when sewing on a cap front. Monday, February 29, This means that it is very difficult to make a cap framing system that fits every possible cap product with exactly the same result.

Cap Embroidery with Melco Embroidery Machines | Melco

The use of a light density, crossed, diagonal underlay will also help to support the top stitches. Digitizing A design that was digitized for a left chest application, may or may not be applicable for a finished cap application. The use of a light density, crossed, diagonal underlay will also help to support the top stitches.

On machines that use tension knobs, the knobs have to first be properly balanced to get consistent thread tension. For this challenge, we need to expand two skill sets, a digitizing and b machine operation. If the embroidery design and the cap design permit you to do so, by all means do so. Sew the front embroidery as you normally would and then run the sides with a different framing system designed by Fast Frames, either the clamping model or the one that uses sticky backing.

Choose a slight diagonal angle for the best results. Even though cap frames were designed to run embroidery on a horizontal plane that theoretically spans degrees of cap frame rotation, the actual sewing field may be limited. To avoid registration problems, complete free standing elements of a design with all colors before moving on to the next element.

Without proper backing to stabilize the melfo, the stitches will pull and gather or pucker.

For more information, see the Hoop Selection section of this manual. This means more stitch depth and thus a little more feed than sewing a left chest application. Once again, the construction of the individual cap will dictate whether you can comfortably frame that particular style of cap and effectively embroider the side panels on the same run.

  DELL D600 AND VGA CONTROLLER DRIVER

Needles with diameters less than 0. While holding the cap frame strap down around the sweat band, release the rear of the cap with your left hand mwlco attach the strap latch melcoo over the hook on the support.

Baseball Cap Embroidery: Digitizing & Machine Operation Tips

The sequence 3,4,2,1,5 would also work. This means that it is very difficult to make a cap framing system that fits every possible cap product with exactly the same result. Once again, the construction of the individual cap will dictate whether you can comfortably frame that particular style of cap and effectively embroider the side panels on the same run.

You may first start out using the auto feed settings when running caps. A mlco that was digitized for a left chest application, may or may not be applicable for a finished cap application. To install the needle plate, simply remove the regular needle plate by removing the screws holding it in place. Without proper backing to stabilize the fabric, the stitches will pull and gather or pucker.

Machine Operation There are several things the machine operator can do to improve the run-ability of caps: Slide the cap frame onto the gauge, making certain the locating tab on the cap gauge fits into the cap frame’s notch, and the cap frame slips firmly under the two roller clips.